Magic Star Diamond Mobic Hardness is 9.25, which is the second hard gem in the world. The magic star diamond reaches D color, Belgian diamond cuts, FL/IF clarity level, and synthetic silicon carbide gems with a diamond proportion of 1: 0.92 can be called Belgian magic star diamond. At first glance, the magic star diamonds and diamonds cannot be separated (jewelry appraisers who have been trained can be easily distinguished with the naked eye), but if you look closely, you will find that the colorful fire light of the magic star diamond is stronger than the diamond. The test under professional instruments, the fire of the magic star diamond is 2.5 times that of diamonds. On the fire color, the diamond is 0.044, and the magic star diamond is 0.104; in terms of refraction, the diamond is 2.42, the magic star diamond is 2.65, the fire color and refraction of the magic star diamond exceed the diamond. In Mo's hardness, the diamond is 10, and the magic star diamond is 9.25, which is much higher than other gems. But the price of the magic star diamond is one -tenth of the same -level diamonds. Mo -star diamond (Mosang diamond) and diamond identification: 1, gravity: magic star diamonds are lighter than diamonds, that is, their proportion is different, the proportion of diamonds is 3.52, and magic star diamonds (Mosang diamond diamond ) The proportion is only 3.22. For non -inlaid materials, the two can be distinguished by the proportion of nailing iodine (proportion of 3.32). 2, hardness: The two can be distinguished from the hardness of Mobi. The Mohs of the diamond is 10, the Mohs hardness of the magic star diamond (Moisan diamond) is 9.25, the magic star diamond (Mosang diamond) It is the second hard gem in the world than other gems. 3, conductivity: According to GIA reports, 80%of the magic star stones (Mosang Stone) are conductive (only blue, blue -gray IIB diamonds in natural diamonds). Common white/light yellow diamonds are non -conductive, so it can be used to identify diamonds and magic star stones (Mosang Stone) with a conductors or magic star instruments. 4, discount rate: The discount rate of magic stones is different from the diamond. The reflective characteristics of the magic star stone are also different from diamonds. Experienced diamond appraisers can distinguish between the two; Therefore, it is not difficult to see the heavy shadow of the magic star's ridgeline and the bottom of the bottom. At this time, if the observation angle is changed, the heavy shadow will still appear. 5, two -axis light characteristics: Due to the two -axis light characteristics of the magic star stone, the observation of its heavy shadow characteristics depends on the perspective of observation. When observing the face -to -face observation from the countertop, it is obvious. When the Stone Stone Crystal C -axis C -shaft will reduce the effects of the shadow, focusing on the bottom of the bottom and the face -to -face shadow of the countertop and the crown can be seen. This characteristic is completely different from the reflection of the crown of the single -refractive diamond. 6, polishing lines: The waist polishing pattern of the magic star stone parallel is completely different from the diamond. And due to the differences in different directions, the polishing direction must be continuously adjusted during the diamond grinding process, and the magic star stone can be polished along the same direction. This is particularly obvious on the adjacent engraving. 7, cutting: Most of the cutting magic star stones are more blunt, which is completely different from diamonds with sharp ridges. 8, internal content: The inner contents of the diamond are different from the magic star stone. There are some internal contents in all the identified magic stones, which are arranged in parallel in need. Some magic stars can be visible in parallel arranged reflexes.
You must be logged in to post a comment.